Bigfoot Sucker Feet
NA Graphics
View Cart
     

Suckers / Grippers / Press Parts

We carry a large selection of suckers, grippers, and other press parts for letterpress and offset equipment.

Please call for quantity pricing on most suckers. Price breaks are at 12 dozen, 41 dozen, and 84 dozen, per sucker.

The most common suckers for Kluge presses are the #1, #2, and #3, for Heidelberg platens the #19H red flat disc, and for both Heidelberg platens and cylinders the #22 cone shaped, and GTO #83 for heavy stock.

Some Vandercook parts are listed in this section, but don't panic because the spring you need isn't shown or listed. We have hundreds of Vandercook parts in stock and for us to find the part you need we need the part number as shown in the Vandercook manual for your press. If you can not find the part number, which is common, then take a picture of the part and where it goes on the press and email to us. We have the original assembly drawings and individual part prints for about 99.8% of everything Vandercook made. We usually have one or more Vandercook parts being made for us at any given point both to maintain inventory and to provide for one of a kind parts. Currently, we are out of the CS-23 Crescent and since this is a lost wax steel casting, it is taking time to have them made. And even though Paul Moxon recommends having one or two of the crescents on hand as a backup, please hold off until these get back in stock.

 
products/static_tinsel.jpg "Static Tinsel"
$18.00
ST101
Anti-Static Tinsel garland is a 1-1/4" diameter copper tinsel with a solid copper wire center that can easily be cut to fit your application. The fine copper strands conduct the static charge from the paper, plastic, and cloth materials that pass over or under the tinsel. Easily installs, no electricity required, and relatively inexpensive. Packaged two twelve yard rolls per box.
Quantity   
 
HeidWashUpBlade "Heidelberg Wash-up Blade for 10x15"
$52.00
P-30209
This wash-up blade will fit most of the post 1953 Heidelberg 10x15 platens. This is not the thin one piece blade sold by others that needs shimming to work but the full thickness blade holder as it should be.
Quantity   
 
10Rudow "#10 Suckers for Miller Offset, for cardboard, per dozen"
$8.52
SU10 Quantity   
 
100Rudow "#100 Suckers for Norfin Collator, per dozen"
$19.20
SU100 Quantity   
 
101Rudow "#101 Suckers for Uhlmann Packaging Machines, per dozen"
$14.40
SU101 Quantity   
 
102Rudow "#102 Suckers, Small Dark Grey for Horizon Collator, per dozen"
$20.40
SU102 Quantity   
 
103Rudow "#103 Suckers, Large Blue for Horizon Collator, per dozen"
$18.00
SU103 Quantity   
 
104Rudow "#104 Suckers for Duplo Collator, per dozen"
$23.40
SU104 Quantity   
 
104aRudow "#104A Suckers for Horizon Collator, per dozen"
$26.40
SU104A Quantity   
 
105Rudow.jpg "#105 Bellows Cup (6901-05057) for Hamada, per dozen"
$26.40
SU105 Quantity   
 
106Rudow "#106 Suckers, Vinyl for Bourg Modulen Collator, per dozen"
$36.00
SU106 Quantity   
 
107Rudow "#107 Suckers for AB Dick Century 3000, per dozen"
$48.00
SU107 Quantity   
 
108Rudow "#108 Suckers, Black for Mitsubishi KA 24236-A, per dozen"
$30.00
SU108 Quantity   
 
109Rudow "#109 Suckers, Blue for Phillipsburg, per dozen"
$6.00
SU109 Quantity   
 
11Rudow "#11 Suckers for Harris 90 ELB, Mann and Macey Collator, for cardboard, per dozen"
$8.52
SU11-6E8 Quantity   
 
11Rudow "#11 Suckers for Harris 90 ELB, Mann and Macey Collator, for paper, per dozen"
$8.52
SU11-6E7 Quantity   
 
110Rudow "#110 Suckers for HTB Feeder, per dozen"
$51.00
SU110 Quantity   
 
111Rudow "#111 Suckers for Muller 020.1924, per dozen"
$7.20
SU111 Quantity   
 
112Rudow "#112 Suckers for Harris (A520-00-1245), per dozen"
$9.00
SU112 Quantity   
 
Heidelberg113 "#113 Suckers for Heidelberg (2144-240-01-00), per dozen"
$12.00
SU113 Quantity   
 
Heidelberg114 "#114 Suckers for Heidelberg (2144-241-01-00), per dozen"
$12.00
SU114 Quantity   
 
Heidelberg115 "#115 Suckers for Heidelberg (2144-242-01-00), per dozen"
$9.00
SU115 Quantity   
 
Heidelberg116 "#116 Suckers for Heidelberg (2144-243-01-00), per dozen"
$12.00
SU116 Quantity   
 
117aRudow "#117 Suckers, Flat Top Depanner Cup, per dozen"
$28.80
SU117 Quantity   
 
"#118 Suckers, Taper Top Depanner Cup, per dozen"
$28.80
SU118 Quantity   
 
12Rudow "#12 Suckers for Harris 1361 LTN, for paper, per dozen"
$8.52
SU12 Quantity   
 
"#12 Suckers, Silicone for Harris 1361 LTN, for paper, per dozen"
$19.80
SUSU12-S Quantity   
 
"#123 Suckers, per dozen"
$8.40
SU123 Quantity   
 
125hRudow "#124H Suckers for Chief 24, for heavy stock, per dozen"
$19.20
SU124H Quantity   
 
125LRudow "#124L Suckers for Chief 24, for light stock, per dozen"
$19.20
SU124L Quantity   
 
125Rudow "#125 Suckers for Cummington Collator and Miehle Vertical, for cardboard, per dozen"
$24.00
SU125 Quantity   
 
13abRudow "#13A Suckers for Miehle CS3122 Feeder, Superchief Light Forwarder, Miller, Didde Glaser Collator, for paper, per dozen"
$22.80
SU13A Quantity   
 
13abRudow "#13B Suckers for Miehle CS3124 Feeder, Superchief Heavy Forwarder, Dexter, Giant, for cardboard, per dozen"
$22.80
SU13B Quantity   
 
14Rudow "#14 Suckers for Miehle, Farrington, Giant, Web and Chief, for paper, per dozen"
$8.52
SU14 Quantity   
 
15Rudow "#15 Suckers, per dozen"
$8.52
SU15 Quantity   
 
"#15A Suckers for Macey Collator and Harris Pickup Sucker, for paper, per dozen"
$8.52
SU15A Quantity   
 
16Rudow "#16 Suckers, Delivery for C&P Rice Feeder, for paper or light cardboard, per dozen"
$12.00
SU16 Quantity   
 
Kluge17 "#17 Suckers, Metal for Kluge, per pair"
$10.50
SU17 Quantity   
 
"#18 Suckers, Metal for Kluge, per pair"
$10.50
SU18
Same as #17. Rubber disc #19K added for cardboard.
Quantity   
 
"#19 Sucker, Key"
$0.45
SU19-KEY Quantity   
 
"#19 Suckers, 0.5 inch Flat Discs for AB Dick, per dozen"
$2.40
SU19AB-0.5 Quantity   
 
"#19 Suckers, 0.75 inch Flat Discs for AB Dick, per dozen"
$3.00
SU19AB-0.75 Quantity   
 
"#19 Suckers, Flat Poly Disk per dozen"
$3.00
SU19K Quantity   
 
"#19 Suckers, Flat Special 1 x 5/16 x 1/32 inches, per dozen"
$3.00
SU19 Quantity   
 
"#19H Suckers, Flat Discs for Heidelberg, per dozen, please specify thick(white) or thin(pink)"
$3.00
SU19H
The pink 19H discs are used on the Heidelberg platen sucker tips by stretching the center hole over the tip of the sucker tube forming a cone shaped sucker. Useful for thicker, wavy, or difficult stock. See also the #83 GTO blue sucker that can be used for both platens and Heidelberg letterpress cylinders.
Quantity   
 
"#19HA Suckers, Flat Discs for Hawes, per dozen"
$3.00
SU19HA Quantity   
 
"#19R Suckers, Flat Discs, per dozen"
$3.00
SU19R Quantity   
 
"#19RZ Suckers, Flat Discs for Royal Zenith, per dozen"
$3.00
SU19RZ Quantity   
 
"#19W Suckers, Flat Discs, per dozen"
$3.00
SU19W Quantity   
 
"#1A Suckers, for narrow margin work, per dozen"
$16.80
SU1A
This sucker has been discontinued, some stock still available.
Quantity   
 
"#1P Suckers, Vinyl for longer life, per dozen"
$30.00
SU1P Quantity   
 
Kluge2 "#2 Suckers, Rubber for Kluge, for card, per dozen"
$4.56
SU2 Quantity   
 
Miehle20a "#20A Sucker, Washer for Miehle Vertical Feedboard, per dozen"
$4.00
SU20A Quantity   
 
"#20B Sucker, Washer for Miehle Vertical Gripper Bar, per dozen"
$3.60
SU20B Quantity   
 
"#20C Sucker, Thin Washer for Miehle Vertical Gripper Head, per dozen"
$3.60
SU10C Quantity   
 
"#21A Sandpaper Discs, extra large, ready glued, per dozen"
$7.50
SU21AL Quantity   
 
"#21A Sandpaper Discs, ready glued, per dozen"
$4.50
SU21A Quantity   
 
"#21B Sandpaper Discs, extra large, without glue, per dozen"
$3.00
SU21BL Quantity   
 
"#21B Sandpaper Discs, per dozen"
$3.00
SU21B Quantity   
 
Heidelberg22 "#22 Suckers for Heidelberg Windmill, per dozen"
$6.00
SU22 Quantity   
 
"#23 Suckers, Amber for Inserting and Gathering Machines, per 100"
$16.00
SU23-A Quantity   
 
"#23 Suckers, large, per dozen"
$6.72
SU23L Quantity   
 
"#23A Suckers for Dexter RGA 717, for light stock, per dozen"
$6.72
SU23A Quantity   
 
"#23R Suckers, per 100"
$27.00
SU23R Quantity   
 
"#23S Suckers, per 100"
$27.00
SU23S Quantity   
 
"#23V Suckers, Blue, per 100"
$17.00
SU23V-B Quantity   
 
"#23V Suckers, Red, per 100"
$17.00
SU23V-R Quantity   
 
"#23V Suckers, Tan, per 100"
$17.00
SU23V-T Quantity   
 
26Rudow "#26 Metal Cap for Kluge, fits standard rubber sucker"
$1.80
SU26 Quantity   
 
"#27A Sucker, Brass for Chief and Webendorfer Offset, for paper"
$9.50
SU27A Quantity   
 
"#27B Sucker, Brass for Chief and Webendorfer Offset, for cardboard"
$6.25
SU27B Quantity   
 
"#28 Feeder Caps for Miehle, per dozen"
$2.40
SU28 Quantity   
 
MiehleFluffer "#29A Fluffer Wires for Miehle, for paper, per dozen"
$39.60
SU29A Quantity   
 
"#29B Fluffer Wires for Miehle, for cardboard, per dozen"
$39.60
SU29B Quantity   
 
"#29C Thumb Screw for Fluffer Wires for Miehle Vertical, with washer"
$0.45
SU29C Quantity   
 
Kluge3 "#3 Suckers for Kluge, per dozen"
$8.52
SU3 Quantity   
 
"#301 Paper Stop Deflector for Chief (M-1-184), clear rigid plastic"
$15.00
SU301 Quantity   
 
"#302 Special Wrench for Chief"
$7.50
SU302 Quantity   
 
Drilla "#305 Hollo Paper Drill Bits, Style A, B, C"
$23.95
SU305-1

Per each in quantities of 1 to 5. Illustration shows Style A for Challenge, Super Speed, and Ottowa Paper Drills.

Our Hollo Drills are manufactured with a special alloy of the finest steels: chromium, vanadium, and molybdenum. They resist wear, stay sharp longer, and won't clog, chip, or twist. The razor sharp cutting edges are carefully machined to precise tolerances. Every Hollo Drill is thoroughly inspected before it leaves the factory. Our paper drills are guaranteed against breakage with normal use.


Quantity   
 
Drillb "#305 Hollo Drill Bits, Style A, B, C, quantities of 6 and up"
$23.25
SU305-10
Illustration shows Style B for Lawson, Seybold, Wright, and Rosback Paper Drills.
Quantity   
 
Drillc "#305 Hollo Drill Bit Style D"
$26.95
SU305-11
Illustration shows Style C for Nygren-Dahly Paper Drills. Sizes available are 1/2", 1/4", 1/8", 3/16", 3/8", 5/16", and 7/16". Please specify on check out page under Special Instructions.
Quantity   
 
Drilld "#305 Hollo Drill Bit Style D in quantities of 6 and up"
$26.25
SU305-12
Illustration shows Style D for Chandler & Price and Pioneer Paper Drills.
Quantity   
 
Miehleairrelease "#30A Air Release Valve for Miehle"
$15.00
SU30A Quantity   
 
Miehlegripper "#30B Cylinder Gripper for Miehle Vertical"
$25.50
SU30B Quantity   
 
PlatenGrippers "#32 Gripper Fingers, narrow, per set of 6"
$25.60
SU32-Nx6 Quantity   
 
"#32 Gripper Fingers, standard, per set of 6"
$25.60
SU32-Sx6 Quantity   
 
KlugeSheetTongues "#33A Sheet Holder Tongues for Kluge, sizes 1-6, per half dozen any size or mix"
$20.70
SU33A
Sold by size--please specify by number, one through six
Quantity   
 
"#33B Screw, Sheet Holder Tongue for Kluge"
$0.30
SU33B Quantity   
 
"#34 Transfer Table Lever Key for Miehle Vertical"
$18.00
SU34 Quantity   
 
"#35A Transfer Table Backstops for Miehle Vertical, per pair"
$20.00
SU35A
Price per pair.
Quantity   
 
"#36 Register Rod Cam for Kluge, left"
$46.50
SU36-L Quantity   
 
"#36 Register Rod Cam for Kluge, right"
$46.50
SU36-R Quantity   
 
"#38A Belt, Fabric for Offset (R120-6050)"
$12.00
SU38A-R120-6050 Quantity   
 
"#38A Belt, Leather Drive for Miehle V-36, V-45, V-50 Pre-War"
$135.00
SU38A-DPRE Quantity   
 
"#38A Belt, Leather Drive for Miehle V-50 Post-War"
$150.00
SU38A-DPOST Quantity   
 
"#38A Belt, Leather for Drive and Motor for Kluge, 112""
$170.00
SU38A-KLUGE Quantity   
 
"#38A Belt, Leather Motor for Miehle V-36, V-45, V-50 Pre-War"
$135.00
SU38A-MPRE Quantity   
 
"#39 Sucker, Telescoping for ATF Chiefs Except Super Chief and Chief 15, use 19K sucker disc"
$10.00
SU39 Quantity   
 
"#4 Suckers, Universal, light duty, per dozen"
$8.52
SU4 Quantity   
 
"#40 Feed Sucker Block for ATF Chief 20, 22 and 29, holds #39 telescoping sucker"
$10.00
SU40 Quantity   
 
"#41A Pin Wrench for Miehle Vertical, straight type, large"
$24.00
SU41AL Quantity   
 
"#41A Pin Wrench for Miehle Vertical, straight type, small"
$6.00
SU41A Quantity   
 
"#41B Pin Wrench for Miehle Vertical, s type, small"
$6.00
SU41B Quantity   
 
"#43 Register Rod Holder for Kluge"
$30.00
SU43 Quantity   
 
"#44A Wrench Kit for Kluge, 7 piece set"
$22.50
SU44A Quantity   
 
"#44B Wrench for Kluge"
$13.50
SU44B Quantity   
 
"#44C Gripper Nut for Kluge"
$0.60
SU44C Quantity   
 
"#44D Side Guide Nut for Kluge"
$6.00
SU44D Quantity   
 
"#44E Delivery Pickup Bolt for Kluge"
$0.90
SU44E Quantity   
 
"#44F Delivery Track Bolt for Kluge"
$1.60
SU44F Quantity   
 
45aRudow "#45A Side Guide Tongues for Kluge, left, per dozen"
$5.00
SU45A-L Quantity   
 
"#45A Side Guide Tongues for Kluge, right, per dozen"
$5.00
SU45A-R Quantity   
 
"#45B Magazine Separator Spring for Kluge"
$0.80
SU45B Quantity   
 
"#45C Center Comber Spring for Kluge"
$0.96
SU45C Quantity   
 
"#45D Side Guide Eyebolt for Kluge"
$10.50
SU45D Quantity   
 
46book trim guide.jpg "#46 Book Trimming Guides for Challenge-Style Cutters, set of 2"
$48.00
SU46
Bolt portion fits on back finger gauge of cutter. Keeps any size booklets flat for trimming. Per set of 2.
Quantity   
 
47-book trim guide.jpg "#47 Book Trimming Guides for Economy-Style Cutters, set of 2"
$36.00
SU47
Economy style, fits on back gauge of cutter.
Quantity   
 
48Rudow "#48A Delivery Pickup Bolt for Kluge"
$0.90
SU48A Quantity   
 
"#48C Delivery Pickup Clamp Base for Kluge, left"
$36.00
SU48C-L Quantity   
 
"#48C Delivery Pickup Clamp Base for Kluge, right"
$36.00
SU48C-R Quantity   
 
"#48D Tube, Delivery Pickup Suction for Kluge"
$45.00
SU48D Quantity   
 
"#5 Suckers, Universal, heavy duty, per dozen"
$8.52
SU5 Quantity   
 
"#50 Tubing, Gum Rubber, 0.25 inch, per foot"
$1.95
SU50-0.25 Quantity   
 
"#50 Tubing, Gum Rubber, 0.375 (3/8) inch, per foot"
$1.95
SU50-0.375 Quantity   
 
KlugeSideGuides "#51A Side Guide for Kluge, complete, brass body, long stem, left"
$57.60
SU51A-L
The picture illustrates the various parts as listed after this item that make up both right and left Kluge side guides with blocks, and the offset stem version.
Quantity   
 
"#51A Side Guide for Kluge, complete, brass body, regular stem"
$54.00
SU51A-R Quantity   
 
"#51B Side Guide Brass Block for Kluge, regular"
$24.00
SU51B-R Quantity   
 
"#51B Side Guide Brass Block for Kluge, thin"
$24.00
SU51B-T Quantity   
 
"#51C Bottom Feed Gauge for Kluge, narrow"
$24.00
SU51C-N Quantity   
 
"#51C Bottom Feed Gauge for Kluge, narrow thick"
$24.00
SU51C-NT Quantity   
 
"#51C Bottom Feed Gauge for Kluge, regular"
$25.60
SU51C-R Quantity   
 
"#51C Bottom Feed Gauge for Kluge, thick"
$24.00
SU51C-T Quantity   
 
"#51D Bottom Feed Gauge Tongues for Kluge, per dozen"
$4.50
SU51D Quantity   
 
"#51E Side Guide for Kluge, complete, with offset stem, left"
$67.20
SU51E-L Quantity   
 
"#51E Side Guide for Kluge, complete, with offset stem, right"
$67.20
SU51E-R Quantity   
 
"#52A Bottom Gauge Band for 19.5 inch Kluge"
$13.00
SU52A-19.5 Quantity   
 
"#52A Bottom Gauge Band for 23.25 inch Kluge"
$13.35
SU52A-23.25 Quantity   
 
"#52A Bottom Gauge Band for 25.5 inch Kluge"
$13.35
SU52A-25.5 Quantity   
 
"#52B Bottom Gauge Band Clamp for Kluge, quick release"
$30.00
SU52B Quantity   
 
"#52C Bottom Gauge Band Clamp for Kluge, left"
$30.00
SU52C-L Quantity   
 
"#52C Bottom Gauge Band Clamp for Kluge, right"
$30.00
SU52C-R Quantity   
 
53Kluge "#53 Blower Flexible Steel Tubing for Kluge, 5 foot length"
$31.50
SU53 Quantity   
 
54aKluge "#54A Sucker, Metal Feeder for Kluge, for cardboard, left"
$33.00
SU54A
In the picture to the left, the top feeder is the #54 A and B for cardboard, and the rubber sucker is interchangeable to the #1, 1a, 2, and 3 sucker, and those are listed separately. The second feeder is the #54 C and D for use with paper and no sucker is used, and the bottom part is the #54 E dummy foot. Use of the various suction devices is discussed in the basic Kluge operating manual.
Quantity   
 
"#54A Sucker, Metal Feeder for Kluge, for cardboard, right"
$33.00
SU54B Quantity   
 
"#54C Sucker, Metal Feeder for Kluge, for paper, left"
$35.80
SU54C Quantity   
 
"#54D Sucker, Metal Feeder for Kluge, for paper, right"
$35.80
SU54D Quantity   
 
"#54E Dummy Feeder for Kluge"
$28.00
SU54E Quantity   
 
"#55 Suckers for MF Miehle Feeders, MF 3968 and ATF Superchief, per dozen"
$30.60
SU55 Quantity   
 
"#56 Suckers for MF Miehle Feeders, MF 3336 and Packaging Machines, for light stock, per dozen"
$16.20
SU56 Quantity   
 
"#56 Suckers, Blue Silicone for MF Miehle Feeders, MF 3336 and Packaging Machines, for light stock, per dozen"
$39.60
SU56-BS Quantity   
 
"#56 Suckers, Neoprene for MF Miehle Feeders, MF 3336 and Packaging Machines, for light stock, per dozen"
$19.20
SU56-N Quantity   
 
"#57 Suckers for Harris 1108, for heavy stock, per dozen"
$15.60
SU57 Quantity   
 
"#58 Suckers for Miehle Stream Feeders, per dozen"
$15.60
SU58 Quantity   
 
"#58 Suckers, Poly for Miehle Stream Feeders, per dozen"
$23.40
SU58-P Quantity   
 
"#59 Suckers for Harris 956-ELB, for light stock, per dozen"
$16.20
SU59 Quantity   
 
"#60 Suckers for MF Miehle Feeders, for light stock, per dozen"
$16.20
SU60 Quantity   
 
"#60 Suckers, Neoprene for MF Miehle Feeders, for light stock, per dozen"
$19.20
SU60-N Quantity   
 
"#61 Suckers for Harris 391-ELB, for heavy stock, per dozen"
$17.40
SU61 Quantity   
 
"#62 Suckers for CS Miehle Feeders, per dozen"
$17.40
SU62 Quantity   
 
"#63 Suckers for Sheridan and Other Collators, per dozen"
$6.60
SU63 Quantity   
 
"#64 Suckers for Miehle Feeders, per dozen"
$6.00
SU64 Quantity   
 
"#65 Sheet Separators for Komori or Fuji, per dozen"
$9.50
SU65KF Quantity   
 
SU65.jpg "#65 Sheet Separators, Brass for Multilith, Hamada and Davidson, per dozen"
$5.50
SU65MHD
Please specify which press the brass sheet separators are needed. Pictured bottom left, Davidson; bottom right, Hamada; top left, Ryobi; top right, Chief, slotted, Komori.
Quantity   
 
"#65 Sheet Separators, Bronze for Chief, per dozen"
$5.50
SU65CB Quantity   
 
"#65 Sheet Separators, Bronze for Multilith and Hamada, per dozen"
$8.00
SU65MHB Quantity   
 
"#65 Sheet Separators, Bronze for Ryobi, per dozen"
$8.00
SU65RB Quantity   
 
"#66 Suckers, Big Foot for AB Dick, heavy, per dozen"
$3.00
SU66-H Quantity   
 
bigfoot "#66 Suckers, AB Dick, Big Foot, regular, per dozen"
$3.00
SU66-R
These suckers fit the Mich-Ren Big Foot feederss.
Quantity   
 
"#67 Suckers, Polyurethane for Harris, for heavy stock, per dozen"
$28.20
SU67 Quantity   
 
"#68 Suckers for Heidelberg Cylinder, per dozen"
$6.36
SU68 Quantity   
 
"#69 Gripper Bolts for C&P, per pair"
$4.25
SU69-Cx2 Quantity   
 
"#69 Gripper Bolts for Kluge D, per pair"
$4.25
SU69-Kx2 Quantity   
 
"#6A Suckers for Macey Collator and Harris, for cardboard, per dozen"
$8.52
SU6A Quantity   
 
"#7 Suckers for Harris Old Style, Giant, Web and Chief for cardboard, heavy, per dozen"
$8.52
SU7-H Quantity   
 
78HamadaStar "#7 Suckers for Harris Old Style, Giant, Web and Chief, for cardboard, regular, per dozen"
$8.52
SU7-R Quantity   
 
"#7 Suckers for Harris Old Style, Giant, Web and Chief, for cardboard, thin, per dozen"
$8.52
SU7-T Quantity   
 
"#7 Suckers, Poly for Harris Old Style, Giant, Web and Chief, for cardboard, per dozen"
$10.20
SU7-P Quantity   
 
"#70 Sucker, Telescoping for Ryobi and Itek, includes #19R sucker disc"
$21.00
SU70 Quantity   
 
"#73 Sucker, Metal Telescoping for AB Dick, for difficult and wavy stock, includes #19K sucker disc"
$21.00
SU73 Quantity   
 
"#73P Sucker, Plastic Telescoping for AB Dick, with shut-off valve, includes #66 sucker"
$9.75
SU73P Quantity   
 
"#74A Sucker, A-Set Telescoping for Multilith and Hamada, for difficult and wavy stock, uses #19k sucker disc"
$45.00
SU74A Quantity   
 
"#74A Sucker, B-Set Telescoping for Multilith and Hamada, for difficult and wavy stock, uses #19k sucker disc"
$45.00
SU74B Quantity   
 
"#74C Sucker, Telescoping for New Style Multilith, includes #19K sucker disc"
$21.00
SU74C Quantity   
 
"#75 Sucker, Telescoping for Chief 15 and 17, for difficult and wavy stock, uses #19K or #19AB sucker disc"
$21.50
SU75 Quantity   
 
"#76 Suckers for Muller Collator, black, per dozen"
$4.56
SU76-K Quantity   
 
"#76 Suckers for Muller Collator, red, per dozen"
$4.56
SU76-R Quantity   
 
"#77 Suckers, Black for Muller Collating and Gathering Machines, per dozen"
$5.64
SU77-K Quantity   
 
"#77 Suckers, Green for Muller Collating and Gathering Machines, per dozen"
$4.56
SU77-G Quantity   
 
78HamadaStar "#78 Suckers for Hamadastar, per dozen"
$9.00
SU78 Quantity   
 
"#79 Suckers for Astro and Sandmar Envelope and Sheet Feeders, heavy, per dozen"
$7.80
SU79H Quantity   
 
"#79 Suckers for Astro and Sandmar Envelope and Sheet Feeders, medium, per dozen"
$7.80
SU79M Quantity   
 
"#8 Suckers for Harris Old Style, Giant, Web and Chief, for paper, per dozen"
$8.40
SU8 Quantity   
 
"#80 Suckers for ATF, Commander 29 Speiss Feeders and Heidelberg, for thin stock, per dozen"
$27.00
SU80 Quantity   
 
"#801 SureFoot for AB Dick, set of 4"
$149.95
SU801 Quantity   
 
"#805 SureFoot for Ryobi, set of 4"
$149.95
SU805 Quantity   
 
"#81 Suckers, Black for Klockner 18092-1 Packaging Machines, per dozen"
$19.20
SU81-K Quantity   
 
"#81 Suckers, Blue for Klockner 18092-1 Packaging Machines, per dozen"
$19.20
SU81-B Quantity   
 
"#81 Suckers, Red for Klockner 18092-1 Packaging Machines, per dozen"
$19.20
SU81-R Quantity   
 
"#81 Suckers, Tan for Klockner 18092-1 Packaging Machines, per dozen"
$19.20
SU81-T Quantity   
 
"#810A SureFoot for Multilith, set of 2"
$85.00
SU810A Quantity   
 
"#810B SureFoot for Multilith, set of 3"
$115.00
SU810B Quantity   
 
"#810C SureFoot for Multilith, set of 4"
$149.95
SU810C Quantity   
 
82Ryobi "#82 Suckers for Ryobi, heavy, per dozen"
$6.00
SU82-H Quantity   
 
"#82 Suckers for Ryobi, regular, per dozen"
$6.00
SU82-R Quantity   
 
83 "#83 Suckers for Heidelberg GTO (42.016.072), per dozen"
$4.20
SU83
Regular #83 are the blue, red is poly. This sucker can be used on Heidelberg platens as well as Heidelberg letterpress cylinders to great success especially for thicker or difficult stock.
Quantity   
 
"#83 Suckers, Poly for Heidelberg GTO, per dozen"
$9.60
SU83-P Quantity   
 
"#85 Suckers, Plastic, per dozen"
$1.80
SU85 Quantity   
 
"#86 Suckers, Black for Klockner 18092 Packaging Machines, per dozen"
$24.00
SU86-K
Also Tan, Blue, or Red.
Quantity   
 
"#86 Suckers, Blue for Klockner 18092 Packaging Machines, per dozen"
$24.00
SU86-B Quantity   
 
"#86 Suckers, Red for Klockner 18092 Packaging Machines, per dozen"
$24.00
SU85-R Quantity   
 
"#86 Suckers, Tan for Klockner 18092 Packaging Machines, per dozen"
$24.00
SU86-T Quantity   
 
88Hamada "#88 Suckers for Hamada CK 02-77, per dozen"
$12.00
SU88 Quantity   
 
"#89 Suckers for Harris 3908-0026, per dozen"
$4.80
SU89 Quantity   
 
9Miller "#9 Suckers for Miller Offset, for paper, per dozen"
$8.52
SU9 Quantity   
 
"#90 Suckers for Toko DYY-9-R1, Multi 1218-CJ-11 and Imperial CJ-11, per dozen"
$27.00
SU90 Quantity   
 
91Hamada "#91 Suckers for Hamada H5-49-01-3, hard, per dozen"
$17.40
SU91-H Quantity   
 
"#91 Suckers for Hamada H5-49-01-3, soft, per dozen"
$17.40
SU91-S Quantity   
 
92Heidelberg "#92q Suckers for Heidelberg Quickmaster"
$7.20
SU92 Quantity   
 
92HeidelbergQuickmaster "#92Q Suckers for Heidelberg Quickmaster, per dozen"
$7.20
SU92Q Quantity   
 
93Mueller "#93 Suckers (020,1913) for Muller Collator, per dozen"
$12.00
SU93 Quantity   
 
"#94 Suckers, Black for Phillipsburg Inserters, per dozen"
$12.00
SU94 Quantity   
 
95McCain "#95 Suckers for McCain, for dozen"
$12.00
SU95 Quantity   
 
96Harris-Aurelia "#96 Suckers for Harris and Aurelia, per dozen"
$42.00
SU96
Bellows type. 1-1/4" across, 1" high, .63" diameter hole
Quantity   
 
97RyobiClear "#97 Suckers, Clear for Ryobi (5640-35-531), per dozen"
$30.00
SU97-C Quantity   
 
"#97 Suckers, White for Ryobi (5640-35-531), per dozen"
$30.00
SU97-W Quantity   
 
"#98 Suckers, Orange Rubber Cap for Muller, per dozen"
$6.00
SU98 Quantity   
 
99Heidelberg "#99 Suckers (42.016.073) for Heidelberg GTO, per dozen"
$18.00
SU99
Also used on Heidelberg letterpress cylinder presses.
Quantity   
 
"#RCS-3121 Suckers for Miehle CS, for heavy stock or sheet metal, per dozen"
$30.60
SURCS-3121 Quantity   
 
"#RCS-3123 Suckers for Miehle CS, for cardboard, per dozen"
$19.80
SURCS-3123 Quantity   
 
"#RTF-1648 Suckers for Miehle TF, for heavy cardboard or sheet metal, per dozen"
$31.80
SURTF-1648 Quantity   
 
"#RTF-1648 Suckers, Neoprene for Miehle TF, for heavy cardboard or sheet metal, per dozen"
$39.00
SURTF-1648-N Quantity   
 
"#RTF-1999 Suckers for Miehle TF, for cardboard or sheet metal, per dozen"
$25.20
SURTF-1999 Quantity   
 
"Heidelberg 10x15 Platen Snap-on Die Jacket, stainless steel, .030 thick, economy"
$84.75
HW222 Quantity   
 
"Heidelberg 10x15 Platen Snap-on die jacket, Boxmaker, stainless steel, .030", made by Bar-Plate"
$196.16
DC21
Boxmaker grade jackets are made from a harder grade of stainless steel and are designed for heavy duty use--long runs, multiple changes of dies, and more demanding die layouts.
Quantity   
 
"Kelsey Grippers for 3x5 Press, per each"
$12.75
KP474 Quantity   
 
"Kelsey trucks, for 5x8 or 6x10, per each"
$5.50
TR58
These trucks have a slot milled on one side that fits on a nib on the roller core. Original Kelsey trucks are plain and will turn independemtly of the roller. When upgrading to new Kelsey rollers from us, we recommend a purchase of these trucks so that the truck is compatible with the roller core. This arrangement helps prevent slur in inking and the truck and roller turn as one unit.
Quantity   
 
"Vandercook Manuals for most Vandercook presses"
$28.00
X25000
Manuals for most Vandercook presses are available from us. Please specify the model you have, i.e., SP-15, #4, Universal I, etc., in the Special Instructions section on the shopping cart page, and include your press serial number. Some manuals are less in price because of the amount of material contained in the manual. A Vandercook manual does not tell you how to print--they assumed anyone buying a press had the necessary skills to operate it but needed the basic maintenance information plus references to part numbers. When requesting parts from NA Graphics, and those are not listed in this web site, we need to know the press model and part number that can be found in the manual. For parts not listed, we have the original Vandercook blueprints and can research what ever it is that may be required, but the manual is an essential part of owning any piece of printing equipment.
Quantity   
 
"Grippers for 8x12 C&P, per set of 2"
$60.80
GF211
Bolts for these grippers are part SU69 at $3.75 set of 2
Quantity   
 
10x15Grippers "Grippers for 10x15 C&P, per set of 2"
$73.60
GF212
Bolts for these grippers are part SU69 at $3.75 set of 2. Each pair of grippers includes a set of right and left gripper fingers.
Quantity   
 
"Grippers for 12x18 C&P, per set of 2"
$80.00
GF213
Bolts for these grippers are part SU69 at $3.75 set of 2
Quantity   
 
"Kelsey Grippers for 5x8, 6x10 press, per each"
$13.85
KP475
These grippers fit a round gripper bar.
Quantity   
 
BoltCandP "C&P Platen Bolt for 10x15 and 8x12 presses"
$100.00
PB100
These are new bolts with correct threading to adjust platen height, C&P presses only. Original bolts on these presses were usually made out of cast iron that will bend and snap under use or attempts to tighten or loosen. These bolts are new and are turned from steel but are exact replacement parts for the original. The fellow who makes these for us is also a letterpress printer.
Quantity   
 
"Vandercook Ball Bearing for Form Rollers, Univ I, III, SP-20"
$18.25
X-2629
Two of these bearings are required for each roller. This is the bearing only, and not the complete bearing block assembly which is available from us as well as the plastic knob and stem. These bearings are "staked" in place in the bearing block ring and it may be necessary for a machine shop to do the work of replacing the bearing.
Quantity   
 
Bowden10x15 "Bowden Cable for 10x15 Heidelberg Windmill"
$132.50
HE-WI3101 Quantity   
 
"Bowden Cable for Heidelberg 13x18 Windmill"
$24.50
HE-02-021-048F Quantity   
 
"Bowden Cable Connecting Clip"
$82.60
HE-T2154
Verify Heidelberg part number from Parts Manual for your press.
Quantity   
 
"Bowden Cable Clamping Piece"
$47.55
HE-T2149
Verify part number from Heidelberg Parts Manual for your press.
Quantity   
 
HeidDieJacket13x18 "Heidelberg Snap-on Die Jacket Economy for 13x18"
$102.50
P-30858
Economy die jacket .030, overall size 12 7/8 x 17 3/4.
Quantity   
 
SP15tripspringdirty "Roller Latch Spring for SP-15 cylinder"
$21.50
X-23790
When these springs break, the cylinder can't trip from the trip position to the print position. The manual shows how to replace these, but it is difficult. The two photos show what the typical SP-15 cylinder side plate looks like with a broken spring hanging from the stud, and the second photo shows the same side plate cleaned up with new springs sitting on the side plate. We recommend buying and replacing these in pairs, and it would be prudent to keep a backup set with the press. The SP-20 is very similar to the SP-15 except the spring is longer.
Quantity   
 
SP15tripspringclean "Roller Latch Spring for SP-20"
$21.50
X-22980
The SP-20 spring is identical to the one for the SP-15 except it is longer. The adjoining picture shows the SP-15 side plate shown above cleaned up and with 4 new springs sitting on the plate. Replacement of the springs can be done without taking the cylinder assembly apart.
Quantity   
 
"Shearing Collar, Heidelberg 10x15 Platen"
$386.00
HE-01-001-052-03
Designed to fail under excessive impression so that the press is not damaged. Every Heidelberg platen owner should have a spare shear collar on hand as a backup. Heidelberg part T-0152.
Quantity   
 
lB7Resize "Vandercook LB-7 Paper Guide"
$4.90
LB-7
Paper guide for SP-15, SP-20, Universal I and Universal III presses. Also used on the #3, #4 and 219 New Style press, but you need to add a bend to fit to the gripper bar on those presses. We can furnish the appropriate round head screw if needed for an extra 25 cents each. Priced per each.
Quantity   
 
"Kelsey Roller Hook, for 5x8 press"
$13.25
KP482 Quantity   
 
HeidBrassAirFilter "Heidelberg Brass Air Filter Screen"
$21.60
P-9410
Air line filter for Heidelberg Windmill.
Quantity   
 
"Kelsey Trucks for 3x5 Press"
$5.00
TR35
These trucks are turned from steel. Priced per each, two are required per roller.
Quantity   
 
HE-WI114 "Heidelberg Sheet Separator--Windmill"
$16.40
HE-WI114 Quantity   
 
SP15BearingBlock "Vandercook SP-15 Bearing Block Assembly--Bearing Block"
$49.50
X-20457
The bearing block assembly for the SP-15 rollers contains four basic parts as shown in the illustration. The black plastic knob should be attached to the stem with a drop of Loctite. One or all of these parts may need replacing based on wear or inappropriate use. Not included are the Nyliners, or the hold down spring and studs added to the rear roller block assembly in later production year models. Let not the Vandercook manual confuse you as these parts put together for the bearing block assembly are listed in some versions of the SP-15 manual as X-21200, and that is the assembly print number which shows the individual parts listed here. A SP-15 requires 4 bearing blocks, and in addition the X-13123 Nyliners are required (4 each) for the roller core ends and these fit into the bearing blocks.

The first part is the bearing block, X-20457, and the block includes the screw shown. The stem and knob are listed separately with their respective part numbers.
Quantity   

 
"Vandercook SP-15 Bearing Block Assembly--Adjusting Stem"
$43.50
x-20455
Stem, threaded for bearing block and knob. The threads that go through the bearing block are often worn to the point the bearing block will no longer keep the stem tight--often caused by the application of brute force to turn the knob when the locking screw is holding the stem in place. Lighten up and learn how to use these parts to avoid costly repairs. Broken knobs happen when vise grips, pliers, or channel locks are used to turn the knob.
Quantity   
 
"Vandercook SP-15 Bearing Block Assembly-Knob"
$4.95
X-11954
Black plastic knob with threaded brass insert. When properly installed, the locking screw on the bearing block is backed off, the knob then turns the stem with finger pressure, and when the roller height is at the proper position, the locking screw is tightened.
Quantity   
 
vandercookSideguide "Vandercook Side Guide Assembly"
$175.00
X-20555
This is the latest version of the side guide used on Vandercook feed tables and was designed for the SP and Universal series. Will also work as a replacement side guide on earlier Vandercook models.
Quantity   
 
"Kelsey Roller Hook Spring, for 5x8 Press"
$7.50
KP477 Quantity   
 
"Amber Tubing for Air Lines 5/8ODx1/2ID, per foot"
$2.70
RH2
Flexible tubing for air lines on presses such as Miehle Vertical and Kluge.
Quantity   
 
"Amber Tubing for Air Lines 7/16ODx5/16ID per foot"
$2.30
RH1
Flexible tubing for air lines on presses such as Miehle Vertical and Kluge.
Quantity   
 
Nyliners "Nyliner for SP-15"
$2.65
X-13123
Flanged Nyliners are used in the bearing blocks for the SP-15 ink rollers. These are designed to take the wear from a steel core of the roller rotating in the steel shaft hole in the bearing block. These are supposed to be replaced as the Nyliners wear, and especially if the flange breaks off. Without Nyliners, the roller's cores will destroy the bearing blocks through wear and there is no way to accurately control ink roller setting. Replace all 4 at the same time. Nyliners should have a drop of oil added occasionally. Other Nyliners for other Vandercook models are in stock but are not listed on this website at present--use the Vandercook part number and we can supply what you need. Don't know the part number? Well, we can sell you a manual so you can become an informed press owner/user, or give us a call and we can help you.
Quantity   
 
SU1 "#1, Kluge Rubber sucker for paper, per dozen"
$4.56
SU1
Also available in Vinyl, order 1P, price $30.00 per dozen


Quantity   
 
" Bed Plate for SP15"
$35.00
BP-SP15
Bed Plate used on Vandercook SP 15 Presses that have a bed ground to .968". Bed plate is used in place of a galley to bring metal type or bases up to type high of .918".
Quantity   
 
"Kelsey Gripper Bar Spring for 6x10"
$7.50
KP480 Quantity   
 
304 Drill adaptor.jpg "#304 Drill Adaptor"
$45.00
Used to drill paper with a standard wood or metal drill, or drill press, use this Drill Adaptor and Style D Hollo Drills.
 
"#29A* Fluffer Wires for Miehle, for paper, per each"
$3.50
SU29A*
Two fluffer wires are required on the feed table for the Miehle Vertical.
Quantity   
 
"Kelsey 3x5 Roller Hook Spring"
$3.25
KP476
One spring per roller hook is required.
Quantity   
 
"Kelsey 3x5 Roller Hook"
$6.95
KP481
One roller hook required for each end of the roller, thus four total required for this press. Priced by the each.
Quantity   
 
"Drive Belt for #4 Vandercook"
$33.66
MM-144
Replacement belt for the ink drum motor to speed reducer on a #4 Vandercook.
Quantity   
 
DSCN1132.JPG "Vandercook SP-15 Timing Pulley"
$136.58
X-21724
Replacement timing gear pulley for the SP-15 ink drum. The original pulley was made from plastic and these shatter, as shown in the picture, with age and use. These are machined from cast iron as direct replacements using the same mounting screws. This pulley is listed as X-21050 in the SP-15 manual but the number was changed by Vandercook subsequent to the publication of the manual.
Quantity   
 
"Vandercook SP-15 Form Roller, your core, rubber"
$175.90
X22155 Quantity   
 
"Kelsey 3x5 Roller Hook"
$6.95
KP481
Roller hook requires the KP476 Roller Hook Spring, one per roller hook.
Quantity